The Company is predominantly a business to business supplier. This Catalogue and any one-off special catalogues and other product brochures produced by the Company are intended for use by business customers. Notwithstanding any other provisions in these Conditions, the Company does not exclude, restrict or modify any liability that cannot be excluded, restricted or modified by law including liability under the Consumer Protection (Fair Trading) Act and its amendments. However, where such statutory provisions apply, or where the Customer is entitled to claim under an express provision of these Conditions (including Conditions 8, 9, 12 and 13), then to the extent permitted by law the Company’s total liability shall be limited at its option to that specified in Condition 14 below.

  1. DEFINITIONS

“Catalogue” means the catalogue (in whatever form, whether paper or electronic) in which these Conditions are set out;

“Company” means Redtec Industries Pte. Ltd. trading as Redtec, its successors and permitted assigns;

“Conditions” means these terms and conditions;

“Contract” means any contract between the Company and the Customer for the sale and purchase of Supplies;

“Customer” means the person(s) or company whose order for the Supplies is accepted by the Company;

“Goods” means any goods supplied or to be supplied by the Company to the Customer and includes their packaging and any replacement Goods supplied under these Conditions;

“GST” means good and services tax under the Goods and Services Act (Cap 117A)

“Services” means any services supplied or to be supplied by the Company to the Customer;

“SGD” means Singapore Dollars;

“Supplies” means any Goods or Services;

“in writing” includes electronic communications.

Reference in these Conditions to any legislation or regulation includes any re-enactment, amendment or substitution of such legislation or regulation.

  1. CONDITIONS

All orders are accepted by the Company subject to and in accordance with these Conditions. These Conditions override and exclude any terms or conditions in or referred to in any negotiations or course of dealing between the Company and the Customer or set out in the Customer’s standard terms and conditions to the fullest extent permitted by law. If there is any conflict between

the other provisions of this Catalogue and these Conditions; or

the provisions of the order and these Conditions

these Conditions will prevail unless the Company agrees otherwise in writing. Together with any terms accepted by the Company in connection with an order, these Conditions constitute the entire agreement between the Company and the Customer in relation to the Supplies ordered. No variation to these Conditions is permitted unless expressly authorised in writing by a director of the Company.

  1. PRICES

All prices for Supplies provided by the Company are in SGD and are exclusive of GST and other duties and taxes and any applicable transport and handling charges which will be added at the time of despatch and shall be payable by the Customer. The Company has used all reasonable endeavours to ensure that prices for the Supplies are accurately set out in the Catalogue but these prices are not binding and the Company reserves the right to change its prices without notice at any time. Additional services or any customisation of the Goods requested by Customer shall be charged at the price quoted in writing by the Company.

The Company’s standard documentation is a single invoice and a single despatch note. The cost of additional copies or of any other documents is not included unless specified on the Company’s quotation or pro forma invoice. The Company reserves the right to charge for copy invoices or where the original has been lost or misplaced by the Customer. The Company will quote for such charges if details are given at the time a quotation is requested. Such charges will be detailed separately.

  1. PAYMENT

When credit terms have been approved, payment is due not later than 30 days of the Company’s invoice, without any deduction, set off or withholding whatsoever. Time for payment shall be of the essence. If the Customer fails to make payment by the due date then, without prejudice to any other right or remedy, the Company shall be entitled to cancel the order or suspend any further deliveries or performance;

appropriate any payment made by the Customer to such of the Supplies (or the Supplies made under any other contract) as the Company may think fit; and

charge interest (both before and after any judgment) on the amount unpaid at the rate of 2% per annum above the official published interest rate of the reserve Bank of Australia from time to time until payment is made in full (a part of a month being treated as a full month for the purpose of calculating interest).

The Company reserves the right to charge for copy invoices or where the original has been lost or misplaced by the Customer. If legal action is taken to recover monies due to the Company the Customer shall reimburse to the Company all legal and other costs and expenses incurred by the Company in such recovery.

  1. NEW ACCOUNTS

The Customer should complete the credit application form that is enclosed in the Catalogue or available on request. Any credit limit granted to the Customer shall at all times be discretionary and may be reduced, suspended or withdrawn at the discretion of the Company at any time without prior notice.

Commercial Credit Accounts are only available to bodies corporate and not to individuals.

Non-bodies corporate may purchase goods by PAYNOW, NETS, Amex, Visa or Mastercard credit cards from the Company’s Trade Counter, on the Company’s website.

Please note that the Company will not be responsible for or bear any bank charges or commissions on transactions. All documentary credits must be marked that all such charges or commissions are for the Customer’s account.

  1. ORDERS

The Company reserves the right to decline to trade with any company or person or to accept orders for Supplies in part.

Orders for certain Goods, in particular Goods which are not in Catalogue or are non-stock items, may be subject to a minimum order quantity or value which the Company will use its reasonable endeavours to notify to the Customer prior to accepting its order.

Once accepted, cancellation and split delivery not allowed without the prior written agreement of a director of the Company. Without limiting the generality of this, orders for Goods which are not in-catalogue, non-stock items, and/or contain any hazardous substances, may not be cancelled.

Orders for Goods are accepted by the Company by despatching the Goods provided, however, that despatch will not be acceptance where the price for the Supplies has been incorrectly quoted or referenced by the Customer in its order.

  1. STANDARD DELIVERY

Subjected to stock availability, orders to be fulfilled within 2-3 business days for orders received before 12 noon on a regular working day. No commitment is given in relation to delivery times achieved.

The Company charges a delivery charge of SGD 15.00 for orders below SGD 250.00. The spend amount shall not include GST, any other taxes or any discounts.

The Company will use reasonable endeavours to meet delivery and/or performance estimates but, except as set out in Condition 8 below, in no circumstances shall it be liable to compensate the Customer for non-delivery, non-performance or late delivery or performance, even where it arises as a result of the negligence of the Company or its carriers. Time for delivery and/or performance shall not be of the essence. Delivery will be made to the address specified by the Customer. The Company may use any method of delivery available to it.

NOTES TO DELIVERY METHOD:

Subjected to stock availability, please take note of the below delivery standard.

(1)Regular Local Delivery (within mainland except restricted are and Sentosa) :

Delivery is scheduled only on Monday to Friday (excluding Public Holiday)

Off-CBD Area  Morning

CBD Area  Afternoon (before 5:00 p.m.)

(2)   Self-Collection: Store location is at 2 Sims Close # 03-01, Gemini @ Sims, Singapore 387298

Business Hours: Monday to Friday (08:30 am to 6:00 pm), please avoid the lunch time from 12pm to 1pm.

Closed on Sat, Sun and Public Holiday

  1. INSPECTION, DEFECTS AND NON DELIVERY

The Customer must inspect the Supplies as soon as is reasonably practicable after delivery, or in the case of Services, performance, and, except as set out in Condition 13 and/or 14 below, the Company shall not be liable for any defect in the Supplies incomplete or failed delivery, shortage of weight or quality of Supplies unless written notice is given to the Company within 7 days of delivery. If the Customer receives a damaged parcel, the Customer should take photographs of the parcel to confirm the damage and notify the Company immediately prior to opening the parcel.

The quantity of any consignment of Goods as recorded by the Company upon despatch from the Company’s place of business shall be conclusive evidence of the quantity received by the Customer on delivery, unless the Customer can provide conclusive evidence to the contrary. The Company will not be liable for any non-delivery of Goods or non-performance of Services unless written notice is given to the Company within 7 days  of the date when Goods should have been delivered or the Services performed in the ordinary course of events.

Any liability of the Company for non-delivery or non-performance or for Goods notified as defective on delivery or Services notified as defective following performance in accordance with this Condition 8 will be limited to, at the Company’s option, replacing the Goods or re-performing the Services within a reasonable time or to refunding the price then paid in respect of such Supplies.

  1. DESCRIPTION

All specifications, drawings, illustrations, descriptions and particulars of weights, dimensions, capacity or other details including, without limitation, any statements regarding compliance with legislation or regulation (together “Descriptions”) wherever they appear (including without limitation in this Catalogue, on despatch notes, invoices or packaging) are intended to give a general idea of the Supplies, but will not form part of the Contract. If the Description of any Goods differs from the manufacturer’s description, the latter shall be deemed to be correct. The Company shall take all reasonable steps to ensure the accuracy of Descriptions but relies on such information, if any, as may have been provided to it by its suppliers and to the fullest extent permitted by law excludes all liability in contract or tort or under statute or otherwise for any error in or omission from such Descriptions whether caused by the Company’s negligence or otherwise. The Company may make changes to the Supplies as part of a continuous programme of improvement or to comply with legislation.

  1. RETURNS

No Goods may be returned other than with the prior agreement in writing of the Company. Prior to returning any Goods to the Company for any reason, the Customer must contact the Company to obtain a return material authorisation number (‘RMA’). All Goods are returned at the Customer’s risk and expense and should be undamaged by the Customer and in their original packaging. The Customer is responsible for returning Goods to the Company and for providing proof of delivery of such return. Appropriate precautions must be taken in respect of Goods classed and identified as ‘static sensitive’.

All Goods accepted for return should be returned for receipt by the Company within 7 days of delivery. The Customer should return the Goods to “Returns Department, Redtec Industries Pte Ltd, 2 Sims Close, #03-01 Gemini @ Sims, Singapore 387298” clearly quoting the Customer’s account number, order number and RMA.

Any Goods returned as ‘unwanted’ or ‘incorrectly ordered’ may at the discretion of the Company be subject to a restocking fee of 20% of the invoice value of the Goods (subject to a minimum charge of SGD20.00). The Goods must be intact as original packaging.

The Company expressly reserves the right (without limiting its discretion under this Condition 10) to refuse the cancellation of any order for or return for credit of Goods supplied by the Company which are not in the Catalogue, are notified by the Company to be not-in-catalogue Goods, non-stock items, consist of computer products or software or contain any hazardous substances. Consumable items are non-returnable.

  1. LIEN

The Company shall have a general lien in respect of all sums due from the Customer upon all Goods to be supplied to the Customer or upon which work has been done on the Customer’s behalf and upon fourteen days written notice to the Customer, the Company may sell such Goods and apply the proceeds towards the satisfaction of any sums due to the Company.

  1. PERFORMANCE AND FITNESS FOR PURPOSE

Subject to Condition 14:

Unless any performance figures, tolerances or characteristics have been specifically and expressly warranted by a director of the Company in writing, the Company accepts no liability for any failure of the Supplies to comply with such criteria, whether attributable to the Company’s negligence or otherwise; and

The responsibility for ensuring that Supplies are sufficient and suitable for a particular purpose is the Customer’s unless specifically stated in writing by a director of the Company.

Any advice or recommendation given by an employee of the Company which is not confirmed in writing by a director of the Company is acted on entirely at the Customer’s risk and the Company shall not be liable for any such advice or recommendation which is not so confirmed. Except as set out in Condition 14, the liability of the Company to the Customer, should any warranty, statement, advice or recommendation confirmed in accordance with this Condition 12 prove to be incorrect, inaccurate or misleading, will be limited to the refund of the price paid for the Supplies or, at the Company’s option, the supply of replacement Supplies which are sufficient and suitable.

  1. WARRANTY/GUARANTEE

The Company will endeavour to transfer to the Customer the benefit of any warranty or guarantee given by the manufacturer of Goods.

In addition, the Company will, free of charge, repair or, at the Company’s option, replace Goods or, in the case of Services, re-perform Services which are proved to the reasonable satisfaction of the Company to be damaged or defective due to faulty materials, workmanship or design for a period of 12 months after the date of despatch of the Goods or performance of the Services.

This obligation will not apply:

if the defect arises because the Customer has altered or repaired such Goods without the written consent of the Company;

because the Customer did not follow the manufacturers’ instructions for storage, usage, installation, use or maintenance of the Goods;

if the Customer has failed to notify the Company of any defect in accordance with Condition 8 where the defect should have been reasonably apparent on reasonable inspection; or

if the Customer fails to notify the Company of the defect within 12 months (or such other period as the Company shall specify at the time of acceptance of the order for the Supplies) of the date of despatch of the Goods or performance of the Services.

Any replacement Supplies made or Goods repaired under this Condition 13 will be guaranteed on these terms for any unexpired portion of the period of guarantee given on the original Supplies. Any Goods which have been replaced will belong to the Company.

The Customer grants to the Company and its employees, agents and representatives a right to enter onto its premises to effect any repair or replacement under this Condition 13. The Customer shall ensure that the Company’s employees, agents and representatives are provided with a safe and secure working environment while at its premises.

Except as set out in Condition 14 below and Condition 8 above, this Condition is the Company’s sole obligation and the Customer’s sole remedy for defective Supplies and is accepted by the Customer in substitution for all express or implied representations, conditions or warranties, statutory or otherwise, as to the satisfactory quality, fitness for purpose or performance of the Goods (or any materials used in connection therewith) or the standard of workmanship of the Services and all such representations, conditions and warranties are excluded.

  1. LIABILITY

The Company shall not be liable for any damage, loss, cost, claim or expense resulting from the failure to give advice or information or the giving of incorrect advice or information whether or not due to the negligence of the Company, its employees, agents or subcontractors.

The Company does not exclude or restrict its liability for any matter for which it would be illegal for the Company to exclude or attempt to exclude its liability. Nothing in these Conditions of Sale excludes or limits the liability of the Company for death or personal injury caused by the Company’s negligence or fraudulent misrepresentation.

Except for any rights to have Goods repaired or replaced or Services re-performed or to receive a refund of any price paid as expressly set out in these Conditions or at law, the Company will be under no liability to the Customer whatsoever (whether in contract, tort (including negligence), breach of statutory duty, restitution or otherwise) for any damage or direct or indirect or consequential loss (all of which terms include, without limitation, pure economic loss, loss of profits, loss of business, loss of use, loss of data, computer downtime, depletion of goodwill, business interruption, increased purchasing or manufacturing costs, loss of opportunity, loss of contracts and the like) howsoever caused or arising out of or in connection with:

  • Any of the Supplies, or their manufacture, sale, performance, characteristics or any failure or delay in performance or supply of the Supplies by the Company or on the part of the Company’s employees, agents or subcontractors;
  • Any breach by the Company of any of the express or implied terms of the Contract;
  • Any use made or resale or on-supply of any of the Supplies or any product incorporating any of the Goods or developed using the Supplies;
  • Any acts or omissions of the Company at the Customer’s premises;
  • Any statement made or not made or advice given or not given by or on behalf of the Company including without limitation any statement as to compliance with legislation or regulation; or
  • Otherwise under the Contract.

Except as contemplated by Condition 14(ii), these Conditions set out the entire liability of the Company to the Customer in respect of the Supplies and shall be in lieu and to the exclusion of all other warranties, conditions, and other terms implied by statute or common law save for any implied terms which by law cannot be excluded. The Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation or otherwise shall be limited to repairing, replacing or, in the case of Services, re-performance or, in any case, at the Company’s option, refunding monies already paid in respect of the Supplies. And the Company hereby excludes to the fullest extent permissible at law all conditions, warranties and stipulations express (other than those set out in these Conditions or given in accordance with them) or implied, statutory, customary or otherwise which but for such exclusion, would or might subsist in favour of the Customer. If the Goods are capable of storing user-generated data, repair may result in loss of that data and, to the fullest extent permitted by law, the Company expressly excludes all liability for such loss of data, and recommends that the Customer take steps to back-up such data before returning the Goods to the Company for repair.

Each of the Company’s employees, agents and subcontractors may rely on and enforce the exclusions of and restrictions on liability in these Conditions in that person’s own name and for that person’s own benefit.

  1. REDTEC PRODUCTFIND

The Customer acknowledges that these services are provided free of charge. Without limiting the generality of Condition 14 in relation to Redtec ProductFind, the Company will make all reasonable efforts to assist the Customer in identifying and/or procuring suitable Goods but accepts no liability for failing to do so in a timely manner or at all nor for failing to source possible or appropriate Goods or for failing to provide the service in the manner or at the times anticipated. It is the responsibility of the Customer to determine whether the Goods are suitable for the Customer’s intended use and no representations or warranties are provided in this regard.

  1. USE OF PERSONAL DATA

The Company handles personal data in accordance with applicable personal data laws, the terms of its privacy policy and the consents it has received from each personal data owner. The Company’s privacy policy outlines how and the purposes for which the Company manages, collects, uses and transfers personal data. REFER PRIVACY POLICY

  1. INTELLECTUAL PROPERTY RIGHTS

The Supplies in this Catalogue may be subject to the intellectual and industrial property rights including patents, knowhow, trademarks, copyright, design rights, utility rights, database rights, circuit layout rights and/or other rights of third parties. No right or licence is granted to the Customer, except the right to use the Supplies or re-sell the Goods in the Customer’s ordinary course of business. The Company shall have no liability whatsoever in the event of any claim of infringement of any such rights howsoever arising.

In particular, without limiting the above, title in any software program forming part of the Goods is reserved to the Company and/or its suppliers. The Customer is responsible for informing itself of the terms of its licence or use and paying any royalty payable. Such programs may be used only with the Goods. The Company owns full copyright in respect of this Catalogue and its reproduction in whole or part is prohibited without the Company’s prior written consent.

  1. PROMOTIONS

In the event that the Company sends promotional material to the Customer in relation to goods or services available from the Company, these Conditions shall apply to all Supplies purchased from such material.

  1. COUNTRY OF ORIGIN

Unless otherwise confirmed by the Company in writing, nothing in this Catalogue is to be taken as representation of the source of origin, manufacturer or production of the Goods or any part thereof. Any fees incurred by the Company to provide certificates of origin (where available), will be charged to the Customer at cost.

  1. EXPORT

These Conditions do not apply to the supply of Supplies by the Company to Customers outside Singapore. Separate Conditions of Supply apply to export transactions and are available on request from the Company’s export department. The Customer is responsible at its own expense for obtaining any licence and complying with any export regulations in force within Singapore and any import or export regulations in force in the country for which the Goods are destined.

Certain Goods imported from the United States of America are subject to specific restrictions. With respect to goods manufactured in the United States, the Customer agrees to comply with all applicable export laws, restrictions and regulations of the United States or foreign agencies or authorities, and shall not import, export, or transfer for the purpose of re-export, any product to any prohibited or embargoed country or to any denied, blocked, or designated person or entity as mentioned in any such U.S. or foreign law or regulation. The Customer represents and warrants that it is not on the Denied Persons and Entities List, Specially Designated Nationals or Debarred Persons List and is not otherwise prohibited by the laws of Singapore, United States or any other jurisdiction from purchasing the Supplies.

The Customer agrees the Goods will not use the Goods in relation to chemical, biological, nuclear weapons, nuclear explosive activities, nuclear fuel cycle, rocket systems (including ballistic missile systems, space launch vehicles, and sounding rockets) or unmanned air vehicles capable of delivering chemical, biological or nuclear payloads.

The Customer understands that Goods purchased are subject to the export control laws of the U.S., European Union and other applicable government authorities, accepts its responsibility to obtain licenses or other authorization to export or import the Goods as required by applicable laws and will not export or import any items except in accordance with applicable laws.

The Customer represents and warrants that it is not a Military End User and will not use the Goods for Military End-Use. The Customer commits that the Goods will not be supplied to a Military End-User or for a Military End-Use.

I/We confirm that the Goods will not be supplied to a Government End-User or for a Government End-Use.

Please note that should an Export License be required to ship the Goods, the customer will be requested to complete and return a signed End User Undertaking form.

The Company reserves the right not to supply to certain customers or to certain countries and to require from the Customer full details of the end use and final destination of the Goods.,

  1. AGE REQUIREMENT FOR CERTAIN GOODS

Where the law requires a minimum age for the purchase of certain Goods, the Customer confirms that he or she is over the required age and that delivery of the Goods will be accepted by a person over the relevant age limit.

  1. PROHIBITED APPLICATIONS

The Goods are not designed, authorised or warranted to be suitable for use in anti-personnel landmines, nuclear facilities or weapons, chemical or biological weapons, missile technology, space or aircraft or air traffic applications, life support or life sustaining equipment, surgical implantation equipment or for any other purpose where the failure or malfunction of the Goods could reasonably be expected to result in personal injury, death, severe property or environmental damage. Use or inclusion of the Goods in any such equipment, system or applications is strictly prohibited (unless the Company agrees in writing that such prohibition does not apply to a particular product) and any such use will be at the Customer’s own risk. The Customer will indemnify the Company and its suppliers against any and all liability and expense (including costs) resulting from any such inclusion or even if damage is attributed to defective design or manufacture.

  1. FORCE MAJEURE

The Company shall not be liable to the Customer in any manner or be deemed to be in breach of these Conditions because of any delay in performing or any failure to perform any of the Company’s obligations under these conditions if the delay or failure was due to any cause beyond the Company’s reasonable control (which shall include, but not be limited to government actions, war, fire, explosion, flood, import or export regulations or embargoes, labour disputes or inability to obtain or a delay in obtaining supplies of Goods or labour) (each a “Force Majeure Event”). On the occurrence of a Force Majeure Event, the Company may, at its option, delay the performance of, or cancel the whole or any part of a Contract.

  1. LEGAL CONSTRUCTION

All Contracts shall be governed by the laws of Singapore. The Courts of Singapore shall have jurisdiction to settle any disputes which may arise out of or in connection with these Conditions or any Contract. The jurisdiction agreement contained in this Condition 25 is made for the benefit of the Company only and the Company shall retain the right to bring proceedings in any other Court of competent jurisdiction. The parties agree to submit to the said jurisdiction of Singapore.

  1. GENERAL

Any provision of these Conditions which is held by any competent authority to be invalid, void, voidable, unenforceable or unreasonable (in whole or in part) shall to the extent of such invalidity, voidness, voidability, unenforceability or unreasonableness be deemed severable and the other provisions of these Conditions and the remainder of such provision shall not be affected.

Failure by the Company to enforce or partial enforcement by the Company of any provision of these Conditions shall not be construed as a waiver by the Company of any of its rights under these Conditions.

The Company shall be entitled, without the consent of or notice to the Customer, to assign the benefit, subject to the burden, of these Conditions and/or any Contract to any company in its group at any time. For the purposes of this Condition, “group” shall mean, in relation to the Company, the Company, any other body corporate which is the Company’s holding company or subsidiary and any other body corporate which is a subsidiary of that holding company.

Save for the Company’s employees, agents and subcontractors, a person who is not the Customer has no rights under the Contract (Rights of Third Parties) Act, Cap. 53B of Singapore, to enforce any of the provisions of these Conditions.

These Conditions supersede all previous terms and conditions which have previously governed a contract for the sale of Supplies from the Company to the Customer.

July 2022